BMK Free Flight Toolkit /

Balsa Selector

Wing Designer

Weigh a sheet, enter its size, and see its density, grade and which free-flight parts it suits. Keep a list of your stock so the right sheet goes into the right part.

Sheet

mm
mm
mm
g
Saved in this browser only.

Result

Density
–
Density
–
Grade
–

Ranges are typical free-flight practice (lb/ft³ × 16.02 = kg/m³). Lighter is not always better: spars and leading edges need stiffness, ribs and sheeting want light, stiff C-grain.

Grain types

A-grain (tangential)Long fibres, flexible across the sheet — bends round curves. Spars, longerons, planking that wraps the leading edge.
B-grain (random)Between A and C. General use: trailing edges, fuselage sides, less critical parts.
C-grain (quarter-sawn)Mottled "speckled" look, very stiff across the sheet, splits easily. Best for ribs, flat sheeting, stabiliser and fin sheet.

What should this sheet weigh?

Take a small kitchen scale to the shop: compare a sheet's weight with this table to pick the grade you need.

My balsa stock